Built for crowded panels: load management and both sensors come in the box. The trade-offs: hardwired only, a three-year warranty and a -22°F rating.
Updated
- 48 A Max output
- 25 ft Cable length
- Wi-Fi Connectivity
- 3 years Warranty
Pros
- SmartAmp load management, UL 3141 certified, two CTs included
- 8–48 A, set by breaker size in the installer's eSetup app
- NEMA Type 4 enclosure for indoor or outdoor mounting
- Load monitoring works without Wi-Fi, per Schneider
- Certified to US and Canadian standards, including CSA C22.2 No. 280 and ULC 3141
Cons
- Three-year warranty, shorter than FLO's or Enphase's five
- Hardwired only; rated down to -22°F rather than -40°F
- App setup uses 2.4 GHz Wi-Fi only
- SmartAmp supports service panels up to 200 A only
- Best for
- Homes with a busy or modest panel (up to 200 A) where the electrician wants load management without a separate energy monitor.
- Not for
- Very cold sites below -22°F, or buyers who want a plug-in charger.
Our verdict
Schneider Charge is the straightforward choice for a home whose panel is close to full. Its SmartAmp load management, certified to UL 3141, comes with the two current transformers in the box: an electrician clips them onto the panel’s feeders, and the charger slows down while a dryer, air conditioner or other big load runs. Schneider says that can help avoid a service upgrade where the local inspector accepts it, and load monitoring keeps working without Wi-Fi.
It is hardwired only, at up to 48 A (11.5 kW) through a 25 ft J1772 cable. The installer sets the maximum current by choosing the breaker size in the eSetup app; Schneider’s guide recommends a 60 A circuit for full output and says not to use a GFCI breaker, since the charger has its own ground-fault protection. It is certified to US and Canadian standards, and Schneider lists the same part number on its Canadian site.
The catches: SmartAmp covers service panels of 200 A or less, the app needs 2.4 GHz Wi-Fi, the warranty is three years, and the rated range stops at -22°F. We track one US store for it so far, and none in Canada yet.
Schneider Charge specs
- 48 A Max output
- 25 ft Cable length
- Wi-Fi Connectivity
- 3 years Warranty
Power
| Max output | 48 A |
|---|---|
| Max power | 11.5 kW |
| Current settings | 8–48 A, set by breaker size in the eSetup app |
Cable
| Cable length | 25 ft |
|---|
Smart features
| Connectivity | Wi-Fi |
|---|---|
| Load management | Yes |
| Power sharing | No |
Support
| Warranty | 3 years |
|---|
Installation
| Breaker for full output | 60 A |
|---|---|
| Max output when plugged in | not listed |
Build
| Enclosure rating | NEMA Type 4 |
|---|---|
| Rated down to | -22 °F |
Certification
| Safety listing | UL; UL 2594, UL 3141, CSA C22.2 No. 280-22 |
|---|---|
| ENERGY STAR certified | Yes |
Manufacturer figures, checked 2 Nov 2026. — means not listed.
Where to buy the Schneider Charge
- Standard Electric Supply$777Go to Standard Electric Supply (opens in a new tab)
Prices and stock change; the retailer’s page is always the final word.
No Canada price yet. Switch region in the header for US prices.
Schneider Charge questions
Does Schneider Charge need a GFCI breaker?
No. Schneider’s installation guide says not to put it on a GFCI breaker, because the charger has its own ground-fault protection between the station and the car. It goes on a dedicated circuit that no other appliance shares, and your electrician follows the manual and the code edition adopted where you live.
What breaker does Schneider Charge need?
The guide recommends a 60 A circuit for the full 48 A. Smaller breakers are allowed: the installer selects the breaker size in the eSetup app (for example 40 A for 32 A output), following the NEC or the Canadian Electrical Code.
Do I need to buy extra sensors for load management?
No. Two CTs (part JPT45792A) come in the box, and Schneider supports no other CTs. A qualified electrician clips them onto the main or subpanel feeders and turns SmartAmp on in eSetup, entering the breaker rating and a fallback current the charger uses if the readings drop out.
Can Schneider Charge be installed outside?
Yes. It is rated for indoor and outdoor use (NEMA Type 4) and operates from -22°F to 122°F. It may slow charging above 95°F and can stop above 122°F until it cools. Schneider recommends 51 inches to the bottom of the mounting bracket, and at least 27 inches outdoors.